Globe 3600, 3850, 3975 Скачать руководство пользователя страница 6

Page 7

INSTALLATION

UNPACKING:
1. Unpack the slicer immediately after receipt.  If the machine is found to be damaged, save the

packaging material and contact the carrier within fifteen (15) days of delivery.  Immediately contact
your source of the equipment.  You have no recourse to damage after fifteen (15) days.

2. You should receive with the slicer, rubber feet, Globe oil, warranty card, wall chart and an owners

operator instruction manual.  Contact Globe or your local supplier if you did not receive all of these
materials.

TO AVOID SERIOUS PERSONAL INJURY PROPERLY

INSTALL SLICER IN ADEQUATE WORK AREA

ALWAYS install equipment in work area with adequate light and space.

ONLY operate on a solid, level, nonskid surface.

NEVER bypass, alter, or modify this equipment in any way from its original condition.  Doing so may
create hazards and will void warranty.

NEVER operate slicer without knife cover and knife ring guard securely installed.

NEVER operate without all warnings attached and Globe warning card and wall chart posted.

INSTALLATION:

1. Read this manual thoroughly before installation and operation.  DO NOT proceed with installation

and operation if you have any questions or do not understand anything in the manual.  Contact your
local representative or Globe first.

2. Remove the slicer from the corrugated box.

3. Attach rubber feet to slicer base, making sure they are firmly tightened.

NEVER USE SLICER WITHOUT RUBBER FEET INSTALLED.

4. Select location for slicer that has a level, solid, nonskid surface and a well-lighted work area away

from children and visitors.

USE AT LEAST TWO PEOPLE TO LIFT SLICER UP TO OPERATING LOCATION.
NEVER ATTEMPT TO LIFT SLICER ALONE.

Содержание 3600, 3850, 3975
























Отзывы: