GlobalView GV-101 Скачать руководство пользователя страница 110

Страница: 110 / 111

110

When the battery light turns red:

A red light indicates the battery power is low and needs to be charged. An orange light will

start to blink when it is in charging status, and the light will be solid orange when the battery

is fully charged.

When the HandsFree operation cannot be executed:

1. Please refer to Ch. 2.2, Section (9) to make sure the HandsFree Carkit Module is

properly installed.

2. If not, please refer to "Index A – Blue tooth HandsFree Carkit Installation" in the user

manual to install the module.

3. After the HandsFree Carkit Module is fully installed, please refer to Ch. 8.1.1 of the

user manual for the blue tooth LED Status.

Standby:

flash once every 3 seconds

Connecting:

flash twice every 3 seconds

Under Connection:

flash three times every 3 seconds

Talking:

flash four times every 3 seconds.

4. Please check to see if the blue tooth LED is functioning normally.

When the Map Data is not shown in the GV-101:

In some cities, if the map is not displayed on the monitor, it is because the map data has not

been downloaded into the memory card. Please refer to Ch. 5 in the user manual for map

upgrade.

If you have installed a different version of Netropa Map Loader in your PC, it may not load

the map data properly and could show a version conflict message. Please remove your current

version of Map Loader and then install it from the CD-ROM again. Please make sure you use

the Map Loader program and map data from the CD-ROM that comes with your GV-101.

Содержание GV-101
















































































































Результаты поиска

Содержание GV-101

Отзывы:

Похожие инструкции для GV-101

Бренды по названию

Популярные бренды

GlobalView GV-101, Руководство пользователя

Результаты поиска

Содержание GV-101

Отзывы:

Похожие инструкции для GV-101

Бренды по названию

Популярные бренды