Connect the Payment Terminal To Register After Initial Register Setup
1. From the main menu on Global Payments Register, scroll down and select
‘More’
then tap the
Register Settings icon.
2. From the list located on the left side of the screen, select
‘Terminals.’
3. Toggle on
‘Global Payments Register A920.’
4. Under Connection Type tap
‘TCP/IP.’
5. Tap the search button.
6. Select the matching IP address for the A920 device you will connect to Register* (the IP address
is visible on the A920 at the top left of the BroadPOS Portico payment application).
7. The Port 10009 will automatically populate after you select the device.
8. You may also manually enter the IP address by tapping in the
‘Address’
field.
9. Tap
‘Setup
’ and wait for Register to complete the setup.
10. Tap
‘Test’
and wait for a successful system test.
11. To complete the setup, press the green
‘Save’
button in the right corner of the screen.
12. You are ready to accept payments.
*If you’re using multiple A920 payment terminals, select one that has not already been connected to a Register device.
