Connect the Payment Terminal To Register During Initial Setup
1. Select the Set up Hardware button
2. In the terminals section, under Device, select “Global Payments Canada Register A920”
3. Tap the search button.
4. Select the matching IP address for the A920 device you will connect to Register*
5. If you do not see the device listed, uncheck the green filter checkbox to show all available network
devices.
6. You may also manually enter the IP address by tapping in the ‘Address’ field.
7. Select “Set up”. Once Set up completes, select “Done”
8. Select “Save” in the upper right corner.
*See next page to find the IP address of your terminal.
7
