9
Chapter 3 Adapter Installation and Configuration
3-1
S
YSTEM
R
EQUIREMENTS
In order to install and use the GL242201-0T your PC system must meet the following requirements:
§
A Card Bus slot
§
PCMCIA revision 2.10 compliant card and socket services
§
Windows
®
95, 98, ME.2000, XP.
§
500 Kbytes free disk space for utility and driver installation
3-2
I
NSERTING THE
GL242201-0T
PC
CARD
To insert the GL242201-0T Network Adapter into a notebook computer, do the following:
1.
Locate an available Card Bus slot.
2.
With the 68-pin connector facing the Card Bus slot and the GL242201-0T card label
facing up slide completely into the Card Bus slot.
Fig. 5 Insert the GL242201-0T into Notebook
After properly inserting the Network Adapter into your notebook, continue with the GL242201-0T
driver and Configuration Utility installation.
NOTE:
The Card Bus slot allows “hot swap” . You may insert or remove the GL242201-0T from
the slot anytime, even when the power of your computer is on.
NOTE
: Windows
®
requires that the Network card and socket services must be compliant with the
PCMCIA revision 2.10 specification. Please check the documentation of the PCMCIA driver
before installing the GL242201-0T.
NOTE: To comply with FCC RF exposure requirements, this device should be operated in
lap-top computer configurations with a separation distance of 20 cm or more between the
antenna and persons. The antenna should not be operated next to a person.
