13
6.
Select “Channel” from the list, and choose a “Value” from the drop down list. FCC
regulations require a “Value” between 1 and 11.
7. Select “Desired SSID” and create the network name that matches the existing one or starting a
new one. The SSID can have any value, but should have the same value as the Access Point. In
Ad-Hoc mode, all clients should share the same SSID.
SSID
In infrastructure association, the stations will link to the AP with the same ESSID as they
have.
8. Select “Desired Tx Rate” and set up a default value: The selections are “Auto”, “2M bps”,
“5.5Mbps”, “11Mbps” or “ 22 Mbps”. The default is set to “Auto” so the device will perform auto fall
back to justify the actual through put of the network.