background image

 

 

Ethernet

Desktop PC with ethernet

Desktop PC with ethernet

Sever

Access

Point

Access Point

Notebook

with

PCMCIA Wireless LAN Card

Notebook

with

PCMCIA Wireless LAN Card

Notebook

with

PCMCIA Wireless LAN Card

Desktop PC

with

PCMCIA Wireless LAN Card

Desktop PC

with

PCMCIA Wireless LAN Card

Desktop PC

with

PCMCIA Wireless LAN Card

Infrastructure
Wireless LAN

Infrastructure
Wireless LAN

 

 

Fig. 2 - Infrastructure Wireless LAN Configuration 

The GL242201-0T provides access to a wired LAN for wireless workstations. An integrated wireless 
and wired LAN is called an Infrastructure configuration. A group of GL242201-0T PC users and an 
Access Point compose a Basic Service Set (BSS). Each GL242201-0T PC in a BSS can talk to any 
computer in the wired LAN infrastructure via the Access Point. 

An Infrastructure configuration extends the accessibility of a GL242201-0T equipped PC to a wired 
LAN, and doubles the effective wireless transmission range for 2 GL242201-0T PCs. Since the 
Access Point is able to forward data within its BSS, the effective transmission range in an 
infrastructure LAN is 

doubled

 
 

             

Notebook

with

PCMCIA Wireless LAN Card

Notebook

with

PCMCIA Wireless LAN Card

Ad Hoc

Notebook

with

PCMCIA Wireless LAN Card

Notebook

with

PCMCIA Wireless LAN Card

Infrastructure

Access Point

 

Fig. 3 - The effective Transmission Range 

The use of a unique ID in a BSS is essential. All GL242201-0T equipped PCs configured without 
roaming options in an independent BSS must be configured with a BSS ID corresponding to the 
ACCESS POINT used in the BSS. Check your ACCESS POINT for its BSS ID or use the Access 
Point Browser Utility program to determine the BSS ID. 

The Infrastructure Wireless LAN configuration is Access Point appropriate for enterprise-scale 
wireless access to a central database, or as a wireless Access Point application for mobile users.  

A point-to-point LAN configuration is possible when two access points are  linked with an optional 
directional antenna (the directional antenna is an optional accessory, please contact your dealer for 

Содержание GL242201-0T











































Отзывы: