Global Streams GlobeCaster, Руководство пользователя

Страница: 32 / 46

32
Et h er n et O ut p ut M od ul e
Start Streaming
This section is intended to assist you with streaming both audio and
video.
1. Launch the GlobeCaster Streaming Software by going to the
5VCTV
menu, then selecting
2TQITCOU
, and then selecting
)NQDG%CUVGT
,
and then
'1%QPHKIWTCVKQP
2. The
&GXKEG5GNGEVKQPCPF5VTGCO5GVVKPIU
panel is displayed (see
“Getting Familiar with the Software” on page 24 for more information
on this panel). On this panel, select the appropriate available device
(in some cases, there may only be one).
3. From this panel, you should open up the
0GVYQTM5GVVKPIU
panel
and configure your network settings. You must set the IP address of
the Ethernet Output Module to one that is valid for your network
connection with your encoder PC.
4. Once you’ve made these settings, click on
1-
on the
'VJGTPGV
1WVRWV&GXKEG5GNGEVKQP
panel to close the panel.
NOTE:
2TQ
ITCO1WV
5. If you’re a GlobeCaster Studio or Live user, make sure you have
GlobeCaster’s Switcher up and running. If you’re a GlobeCaster Post
user, make sure you have GlobeCaster’s Editor up and running.
6. Assign whatever content you wish to stream to the
2TQITCO1WV
.
Whatever is being sent from the
2TQITCO1WV
is what is being
streamed.
It’s important to understand that when you have content playing in
the Program Out, the Ethernet Output Module is picking it up. The
user must control the starting and stopping of the stream through the
encoder.
7. On the encoder, open whatever encoding application you may have
(Windows Media Encoder, Real Producer, etc.). Each application has
different methods of achieving similar results, therefore consult the
documentation that came with your encoding software. That being
said, you want to create a custom encoding session. In this session,
select the audio and video capture drivers for the Ethernet Output
Module. The drivers are called
)NQDCN5VTGCOU0GV#WFKQ%CRVWTG
and
)NQDCN5VTGCOU0GV8KFGQ%CRVWTG
, respectively.