Global Streams GlobeCaster, Руководство пользователя

Страница: 15 / 46

15
GlobeCaster
E t her n et O ut p ut Mod ul e
3. After you’ve made the connections to the network, load a
GlobeCaster program, look for the yellow
.0-
light to illuminate.
This will ensure that your module and connections are correct.
4. If your light does not illuminate, check your network connection.
Installing more than one Ethernet Output Module
It is possible to install more than one Ethernet Output Module into your
GlobeCaster system. If you choose to do so, it is preferred that you
daisy
chain your modules together. The process of daisy chaining involves using
the same channel on the Audio Router.
Figure 1.7: Daisy Chain Method
In figure 1.7, each slave represents one Ethernet Output Module. The
cable from the master is attached to an open channel on the Audio Router.
The TDM ribbon cable is attached to JP17 of the first module. Each
Ethernet Output Module comes with its own TDM ribbon cable. Using
the next ribbon cable, attach one end to JP19 of the first module and the
other end to JP17 of the second module. Repeat this process until you
come to the last module. Every module except the last module
must have
the jumper on JP18 removed. Only the last module can have the jumper
on JP18.
from
Master
Slave Slave Slave
Terminator if
necessary
JP17
JP19