9
User's Manual
Wall Mounted Filtered
Water Cooler
Resetting Filter Status
Note:
This step is not required for initial use
1. Press and hold
ENTER
button for 5 seconds, until all
5 LED lights flash.
2. Tap
SET
button; all 5 LED lights will be displayed.
3. Press and hold
SET
button for 5 seconds to reset
filter status.
Select Filter Size
1. Press and hold
ENTER
button for 5 seconds, until all
5 LED lights flash.
2. Tap
SET
button to access Filter Size mode:
• Tap
SET
button 1 time to select 3600 gallon filter
option. 4 LED light will be displayed.
• Tap
SET
button 2 times to select 3000 gallon filter
option. 3 LED lights will be displayed.
• Tap
SET
button 3 times to select 1500 gallon filter
option. 2 LED lights will be displayed.
• Tap
SET
button 4 times to select NO filter option. 1 LED
lights will be displayed.
3. Tap
ENTER
button to confirm filter size.
Note:
• System will timeout and revert to previous setting if no
selection is made within 2 minutes.
• If “NO” filter option is selected, zero LED status bars
will be displayed in standard view.
• Filter size does not need to be reselected if replacing a
filter with the same capacity as the previously used filter.
Programming
Buttons:
Enter
Set
Programming Settings
Accessing the Programming Buttons:
To access the programming buttons, open the filter access door on the
lower cover using the provided key (H4). The two program buttons are
located on the top of the filter access door frame.
