Global Industrial 761217 Скачать руководство пользователя страница 8

Wall Mounted Filtered

Water Cooler

8

User's Manual

Operation

Note:

 Initial water flow may have sputter due to air in the 

water lines; this will be eliminated once air is purged from 

all water lines.
To operate drinking fountain, push front or side activation 

buttons on the stainless steel pan to dispense cooled-

filtered water from the bubbler.

Adjusting Settings

Water Flow Pressure:  Adjust the water flow pressure as 

needed by turning the water control valve.  Turn clockwise 

to decrease the water pressure, or counterclockwise to 

increase the water pressure.

Note:

 When adjusting, aim water flow to the center of the 

stainless steel pan.

Note:

 Initial dispenses may have air in line which may 

cause a sputter. Allow a few seconds for air to be purged 

from the water line.
Water Temperature: Machine comes with a preset water 

temperature of around 45°F. If a different temperature is 

required, remove Lower Cover and access the thermostat 

on the front housing frame. Using a flathead screwdriver, turn 

thermostat screw clockwise to lower temperature setting.  

Note:

 Please allow 5-10 minutes for water temperature 

to change.

Installing/Replacing Filter

1.  Remove filter access door on the lower cover using the 

provided key (H4).

2. Grasp old filter and turn counterclockwise to remove 

from the filter head.

3.  Insert new filter onto filter head by turning the filter 

clockwise until locked into place.

4. Reinstall and lock the filter access door.
Replacement Filters: Model 670336

For more information visit: globalindustrial.com or 

call 1-800-645-2982.

Water 

Filter

H4

Filter Status Lights

When filter level is at 100%

5 LED bars will be displayed

When filter level is at 80% 

4 LED bars will be displayed

When filter level is at 60% 

3 LED bars will be displayed

When filter level is at 40% 

2 LED bars will be displayed

When filter level is at 20% 

1 LED bar will be displayed

When filter level is at 10% 

1 LED bar will be displayed and will FLASH

When filter level is at 0% 

5 LED bars will be displayed and will FLASH

Содержание 761217











Отзывы: