18
•
2 blinks: the robot stopped for safety reasons since it didn’t find grass for al long period of time (if
working without border wire) or because it detected to be out of border without any reason (if
working with border wire). It is suggested to verify the goodness of the indication and, in case,
modify the area where the robot showed the problem if necessary. If the robot is used with border
wire, please verify that all the distances provided in the “Installation” document are respected,
exscpecially in case of installation on slopes.
•
3 blinks: (only robot with recharging station, installation with guide wire) the robot, bouncing on the
external border of the lawn looking for the guide wire, was not able to reach the wire on time. It is
suggested to verify that guide wire installation is in accordance to all the requirements and
suggestions provided within “Installation” document.
•
4 blinks: (only robot provided with recharging base, installation with border wire) the robot does not
receive the signal from the border wire. Verify the status of border wire (interruptions, oxidations,
etc…), signal transmitter, power supply and all wirings. Verify the compatibility between transmitter
and receiver, verify whole installation is in accordance with imposed requirements.
