6. Position casters and trim rails as shown and mount using provided nuts, bolts flat washers and lock
washers; hand tighten only. (Fig 7)
Fig 7
7. Invert leg and caster assembly to the upright position.
8. Position base, insulation side up, on leg and caster assembly and peel insulation blanket back from each
corner to expose pre-drilled holes.
9. Insert 4 mounting bolts and washers in each corner of the base as shown. (Fig 8)
Fig. 8
10. Secure base to legs using provided nuts and washers
11. Tighten all hardware, top and bottom.
12. Reposition insulation blanket and tuck edges under base flanges.
13
