Integrated Peripherals
OnChip Primary / Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
Primary & Secondary Master/Slave PIO
These four PIO fields let you set a PIO mode (0-4) for each of four IDE
devices.
When under "Auto" mode, the system automatically set the best mode
for each device
Primary & Secondary Master/Slave UDMA
When set to "Auto" mode, the system will detect if the hard drive
supports Ultra DMA mode.
Init Display First
This item allows you to decide to activate whether PCI slot or on-chip
VGA first
OnChip USB
--> Enabled or Disabled OnChip USB support.
USB Legacy Support
--> Enabled or Disabled USB Legacy support.
USB Mouse Support -->
Select Enabled if your system contains a
Universal Serial Bus (USB) controller and you have a USB mouse.
IDE HDD Block Mode --->
Block mode is also called block transfer,
multiple commands, or multiple sector read/write. If your IDE hard drive
supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive
can support.
Onboard Lan Boot ROM--->
The default setting is "Disabled" that to
shorten the booting time.
Onboard Lan--->
Select "Enabled" if your system contains onboard LAN
supports.
Onboard FDD Controller --->
Select Enabled if your system has a floppy disk controller (FDC) in-
3301040 User's Manual
33
