Global American 2901190, Руководство пользователя

Страница: 43 / 58

2901190 and 2901200 User’s Manual
Page 43
JP4 Description
Short 1, 3 COM1 pin-9 is 12V output
Short 3, 5 COM1 pin-9 is 5V output
Short 5, 7 COM1 pin-9 is 5V output
Short 7, 9 COM1 pin-9 is RI input Default
Short 2, 4 COM2 pin-9 is 12V output
Short 4, 6 COM2 pin-9 is 5V output
Short 6, 8 COM2 pin-9 is 5V output
Short 8, 10 COM2 pin-9 is RI input Default
Table 3-4: COM1 and COM2 Pin-9 Signal Select Jumper Settings
3.9 HDD Installation
To install the HDD into the 2901190/2901200, please follow the steps below:
Step 1:
Remove the back cover . See
Section 3.7
above.
Step 2:
The HDD bracket is attached to the platform
by four retention screws. Remove the four retention screws from the platform
(
Figure 3-4
).
Figure 3-4: HDD Bracket Retention Screws
Step 3:
Attach the HDD bracket to the HDD. To do this, align the four retention screw
holes in the two sides of the HDD bracket with the retention screw holes on the