211026v1
START-UP PROCEDURE
After the bike has been properly assembled following the assembly video at
user manual, all components are secured correctly, and you have read this entire manual plus you have
viewed the operating video at www.getglion.com, you may turn the bike on and select a power level
(
default setting is “1”)
following the steps outlined below:
1. Ensure proper handlebar and seat adjustment of the bike to the rider. Lowering the seat so the rider
can put one or both feet flat on the ground without dismounting from the seat may offer a safer and
more comfortable introduction to operating the bike. Make sure quick release clamps for the seat post
and the handlebar are securely locked. Make sure the two step folding mechanism for the frame and
stem are properly tightened and locked. Complete the Pre Ride Safety Check described later in this
manual.
2. Turn the bike on by pressing and holding the On/Off power button for 1 second.
3. Turn on the headlight if needed or desired by pressing the
button.
4. Select the desired level of pedal assistance (PAS) between level 0 through 5 using the up and down
arrows on the display remote. Level 1 is the default setting. It corresponds to the lowest level of pedal
assistance. Level 5 corresponds to the highest level of pedal assistance. Level 0 activates the thumb
throttle and inactivates the pedal assistance. Start in PAS level 0 or 1 and adjust from there.
5. Begin riding carefully. With the proper safety gear and rider knowledge, you may now operate your
bike from Glion. On a flat surface, in a low gear (1 or 2), most riders should be able to begin pedaling the
bike with PAS 0 or 1. You may also use the throttle to accelerate and maintain your desired speed with
PAS set to 0.
6. The throttle is used by slowly and carefully depressing the thumb throttle downward. The throttle is
active whenever the bike is turned on and PAS is set at
“0”. Do not use the throttle unless you are on the
bike.
WARNING:
Do not use the throttle while dismounted. Avoid accidental application of the
throttle while dismounted; anytime you are moving the bike while dismounted, ensure the
bike is powered off to prevent accidental application of the throttle.
NOTICE:
Even if you are an experienced bike user, please take the time to read and implement the
guidelines describ
ed in the owner’s manual accompanying your
E-bike by Glion, and any manuals
included with each subcomponent.
PARKING, STORAGE, AND TRANSPORT
Please follow these basic parking, storage, and transport tips to ensure your bike is well cared for on and
off the road.
• When pushing or carrying the bike manually, turn off the power to avoid accidental acceleration from
the motor.
• Turn the power and any lights off to conserve battery.
Содержание 510 B1
Страница 31: ...211026v1...
