Glidecam Smooth Shooter, Быстрая настройка

Страница: 28 / 33

28
With the SPRING inside the SUPPORT ARM and the ARM angled upwards,
manually connect an ADJUSTER BOLT so that it threads into the center of the
SPRING as shown in figure 34. Using an ALLEN WRENCH, rotate the
ADJUSTER BOLT clockwise until the SPRING reaches at least the position
marked “0” on the GUIDE SCALE WINDOW.
NOTE: When installing two SPRINGS into the SUPPORT ARM, you will need
to make sure that both RETAINING BOLTS are installed first , before you will
be able to connect either of the ADJUSTER BOLTS.