Glidecam Smooth Shooter, Быстрая настройка

Страница: 12 / 33

12
Connect the SMOOTH SHOOTER SUPPORT ARM to the GLIDECAM
SUPPORT VEST. First, note the location of the two RECEIVING HOLES in the
ARM CONNECTOR BAR shown in figure 10. Next, carefully align and guide
the two STEEL PINS located on the back end of the RIGID ARM down into the
two RECEIVING HOLES as in figure 11. Make sure that the arm is fully
inserted into the RECEIVING HOLES as in figure 12.
Figure 11 Figure 12
Figure 13
If everything has been done properly so far, you should now have the SUPPORT
ARM attached to the VEST, as in figure 13.