Glidecam Smooth Shooter, Быстрая настройка

Страница: 14 / 33

14
Figure 16
If your SLED is too heavy for the SUPPORT ARM, in the ARM’S current
factory setting, you will need to increase the SPRING TENSION of the ARM by
following the procedures outlined in the ADJUSTING THE LOAD SETTINGS
OF YOUR SUPPORT ARM section of this manual.
If your SLED is too light for the SUPPORT ARM, in the ARM’S current factory
setting, you will need to decrease the LOAD CAPACITY of the ARM by
removing one of the SPRINGS as outlined in the REMOVING THE SPRINGS
FROM YOUR SUPPORT ARM section of this manual.