23
If the HD-2000 leans to the right, then you will have
to loosen the THUMB SCREWS on the bottom of
the CAMERA MOUNTING PLATFORM and then
turn
the
side
to
side
adjustment
knob
counterclockwise. If the HD-2000 leans to the left
from the operator’s point of view as in Photo #41
then move it to the right by turning the side to side
adjustment knob clockwise. Always secure and
firmly tighten the THUMB SCREWS after any
adjustment. The side to side horizontal axis is shown
correctly adjusted in Photo #40
After adjusting the side to side balance as mentioned
above you might have to go back and readjust the
front to back balance to obtain a truly fine balance of
the whole system. You can use your eyes to judge
for correct horizontal balance, or you can use a
small and lightweight bubble level (not included) to
ensure the HD-2000 has correct horizontal balance.
NOTE
: The Horizontal Balance of the HD-2000
becomes less sensitive as the HD-2000 becomes
increasingly bottom heavy, and conversely, the
horizontal balance becomes very sensitive, as the
HD-2000 progresses towards correct vertical balance
(see next section).
43
43
43
40
41
42
