GLIDEAWAY CB2N2, Руководство пользователя

Страница: 17 / 50

16
OPERATION - SETTING THE MEMORY PRESET
To set the Memory A preset, perform the
following steps:
1
Press the Flat ( ) button so the bed
is flat.
2
Adjust the head and feet positions as
desired.
3
Press and hold the TIMER/ALL OFF ( )
button until the remote’s backlight starts
blinking (approximately three seconds),
then release the button.
4
Press the MEMORY A ( ) button
to memorize. The backlight will stop
blinking to confirm that the memorizing
was successful.
5
To restore the Memory Preset to
their factory positions, press and hold
the TIMER/ALL OFF (
) button for
approximately six seconds; the remote’s
backlight will blink after three seconds,
and then turn off after another three
seconds to confirm that the remote
was reset.