GLIDEAWAY CB2N2, Руководство пользователя

Страница: 10 / 50

9
ASSEMBLY - KING BASE
It is HIGHLY recommended to use two people for the installation of this product. To
assemble, please perform the following steps:
1
Carefully lift both Base Pieces from the
shipping carton, keeping the unit’s top-
side down. Remove the plastic wrapping
from the bottom to access the bases.
2
Insert the Connecting Rods into one of
the Base Pieces and then slide the other
Base Piece onto the Connecting Rods as
shown.
3
Secure the Base Pieces to each other
using the eight hex bolts (four hex bolts
for each Connecting Rod) making sure to
hand tighten each and then tighten 1/4
turn more, as over-tightening could cause
damage to the frame or Connecting Rod.
4
Insert the foot motor cable into the
Control box.
Note:
Continue with the installation on
page 6, step 2.