10
Assembly - Headboard Bracket
Headboard brackets may not be standard with purchase of adjustable base and can be
purchased separately. See page 16 to purchase.
IMPORTANT: The headboard bracket must be assembled to the base AFTER the bed
base has been completely assembled. After assembling the bed according to the
owner’s manual, see this sheet to assemble the head board bracket.
Unpack the kit and make sure the following is included:
PART A
Qty: 2
PART C
Qty: 2
PART B
Qty: 2
PART E
M8 Bolt
Qty: 4
PART D
M8x16mm Hex Bolt
Qty: 8
PART F
M8 Nut
Qty: 4
PART H
Allen Key
Qty: 1
PART G
Washer 10 Zinc
Qty: 4
Completely raise the
headsection of the bed
to access the frame to
which the headboard
bracket will mount.
Identify the two thread-
ed holes that will be used
to mount bed attach-
ment ( Part A) in Step #2
1
Line up the holes in the
bed attachment (Part A)
with the two threaded
holes on the bed base.
Make sure the horizontal
fitting of the bed attach-
ment (Part A) points
towards the inside of the
bed. Insert two screws
(Part D) provided with the
kit into the threaded holes
and tighten with the Allen
key (Part H) provided with
the kit.
2
Assembly - Headboard Bracket
IMPORTANT: The headboard bracket must be assembled to the base AFTER the bed
base has been completely assembled. After assembling the bed according to the
owner’s manual, see this sheet to assemble the headboard bracket.
What is Included?
Unpack the kit and make sure the following is included:
Fig. 1
PART A
PART D
Fig. 2
Bed Attachment
Horizontal Shaft
Headboard Attachment Plate
Содержание CB2N2
Страница 1: ...OWNERS MANUAL NAVIGATE 2 0 Base Comfort OWNERS MANUAL MANUAL DE INSTRUCCIONES...
Страница 25: ...24...
Страница 49: ...48 Page intentionally left blank...