Glentek SMB9675-1A-1, Руководство по установке и эксплуатации

Страница: 22 / 36

20
A - 4. Encoder Output Connector
Table A - 4.1. Encoder Output Designations: Labeled as P2 on servo drive.
Table A - 4.2. Encoder Output Connector
A - 5. Serial Communication Connector
Table A - 5.1. Serial Communication Designations: Labeled as P3 on servo
drive.
Table A - 5.2. Encoder Output Connector
A - 6. Power and Signal Wiring
6.1. Recommend 3-phase input, 3-phase output, and chassis GND power wiring, 8 AWG (8.36 mm
2
)
or larger, 105°C rated PVC or better.
6.2. Recommend BUS+, BUS Return, and brake power wiring, 10 AWG (5.26 mm
2
) or larger, 105°C
rated PVC or better.
6.3. Recommend all signal wiring, 22 AWG (0.326 mm
2
) or larger, 105°C rated PVC or better.
Connector Description/Type 5-Pin Terminal Block
Terminal Block,
5 Position, 22-12 AWG
Phoenix Contact 1934890
Designations
Pin#
I/O Name Function
8 Power GND Encoder Power Return
9 Output EOA + Encoder Channel A +
10
Output EOA - Encoder Channel A - (not)
11
Output EOB + Encoder Channel B +
12
Output EOB - Encoder Channel B - (not)
Connector Description/Type 8-Pin Male Mating Connector
Standard Commercial, RJ-45 Commercial, RJ45
Pin# I/O Name Function
1 Input RS-485 RX + RS-485 R
2 Input RS-485 RX - RS-485 Receive -
3 Reserved Reserved Reserved
4 Input/output COMMON Logic Ground
5 Output RS-232 TX RS-232 Transmit
6 Input RS-232 RX RS-232 Recieve
7 Output RS-485 TX + RS-485 Tr
8 Output RS-485 TX - RS-485 Transmit -