Page
11
of
27
CONNECTING THE BEATRICE MIX32 TO A DANTE
®
NETWORK
The Beatrice Mix32 is a network audio device utilising the reliable and versatile
Dante
®
audio over IP protocol. Dante
®
is a proprietary system (although very widely
used) the originators of which are Audinate.
The information below is only meant as a very basic guide. Full details of the power
of Dante
®
network audio and instructions for using it can be found at
www.audinate.com
Getting Dante Controller
If you are connecting the inferno to a new Dante network the first thing you will need
to do is to get the free Dante controller software from Audinate.
This can be downloaded by visiting Audinate’s web site at www.audinate.com
Connecting Beatrice Mix32 To the Network
Beatrice Mix32s can be connected to the network that you are going to use for your
audio distribution simply by plugging in either, and, or any of the network
connections on the front. Once connected to the network it will be possible to see the
Beatrice from within the Dante controller and route its’ audio circuits.
Audio Over IP Network
We strongly recommend that you consider your network topology carefully and
would not recommend sharing broadcast audio and general data on the same
network.
For more details of audio over IP network structure please visit www.audinate.com
