Page
11
of
29
LH REAR PANEL LAYOUT
1.
XLR Analogue Output
This male Neutrik XLR connector will output a summed mix of all Dante inputs.
The Beatrice LH will also output this exact same mix to it
’s Dante transmit
channel 1.
2.
DC Loop output
This is a logic output that will activate when a call is detected on any one of the 4
input channels. See the wiring info at the end of the manual for pinout.
3.
RJ45 Network interface
This is a standard 100Mbps ethernet IP interface. The amber LED indicates
network activity and the green LED indicates PoE power status. The PoE source
used to power the device can be a mid-span adapter or a network switch with
PoE.
4.
USB update connector
This Mini USB 2.0 connector is used only for device firmware updates. Please
refer to the firmware update section of the manual for a firmware update guide.
1.
XLR Analogue Output
2.
DC Loop output
3.
RJ45 Network interface
4. USB update connector
