Page
9
of
29
LH FRONT PANEL LAYOUT
1.
Power LED
LED that indicates if the device is powered on or off.
2.
LCD Display
This LCD Display is used to display the loudspeaker volume level as well as
the setup menu. When then device is in it
’s normal rest state, the LCD
backlight will switch off after a few seconds.
See the setup mode section for more information.
3.
Light house
The light house comprises 12 RGB LEDs and can be configured to illuminate
upon detection of an incoming call as well as incoming audio presence such
as speech or program.
When a call is detected the light house will flash on and off for 5 seconds, and
when present audio is detected the light house will illuminate solidly for the
duration of the audio being present.
The global channel colour can be configured in the setup menu. The choice of
colours available are: Red, Green, Blue, Yellow, Purple, Orange.
The light house has two brightness settings; low & high for when using the
device in differently lit environments.
3.
Light house
1.
Power LED
2.
LCD Display
4.
Setup button
5.
Setup encoder
