gledhill PulsaCoil PCBP 120, Инструкции по проектированию, установке и обслуживанию

Страница: 5 / 28

Page 5
Notes:-
1. The heat losses from thermal stores should not be directly compared with heat
losses from unvented or vented cylinders because they are treated diff erently in
SAP. The SAP calculator takes account of the type of store and various correction
factors are included to refl ect the diff erent ways that the hot water and heating
operates.
2. The fl ow rates are based on a 35°C temperature rise and assume that recommended
pressures and adequate fl ow are available at the appliance. The fl ow rate will be
reduced if the available water pressure is below that recommended.
3. The domestic hot water outlet temperature is automatically regulated to
approximately 52°C at the bath fl ow rate of 18 litres/min recommended by BS
6700. The temperature is user adjustable.
Technical Specifi cation
Description PCBP 120 PCBP 150 PCBP 180 PCBP 220
Appliance height mm 1131 1332 1533 1734
Appliance width mm 560 560 560 560
Appliance depth mm 605 605 605 605
Appliance weight (empty) kg 54 63 69 78
Approx weight (full) kg 172 205 234 268
Total volume (nominal) litres 118 142 165 190
Volume heated (on peak) litres 60 60 70 80
Heat loss 1 kWh/24hr 1.12 1.31 1.50 1.60
Hot water fl ow rate 2 up to 18 litres/minute up to 22 litres/minute
Table 1.1
Model Selection
Bedroom 1 1-2 2-3 2-3
Bathroom 1 or 1 or 1 1
En-suite shower room 1 1 1 2
Model selection data
(7 hour off peak)
PCBP 150 PCBP 150 PCBP 180 PCBP 220
Model selection data
(10 hour off peak)
PCBP 120 PCBP 150 PCBP 150 PCBP 180
Table 1.2
DESIGN
TECHNICAL DATA