gledhill PulsaCoil PCBP 120, Инструкции по проектированию, установке и обслуживанию

Страница: 2 / 28

Page 2
CONTENTS
Section Page
DESIGN
Introduction 3
Technical Data 5
System Details 9
INSTALLATION
Site Requirements 12
Installation 13
Commissioning 16
SERVICING
Annual Service 17
Changing Components 17
Short Parts List 18
APPENDIX
Appendix A 19
Appendix B 20
Appendix C 21
Notes 22
Terms & Conditions 24
BENCHMARK
Commissioning Checklist 26
Service Record 27
ISSUE 5: JANUARY 2014
The Gledhill PulsaCoil range is a WBS
listed product and complies with the
HWA Specification for hot water only
thermal storage products. The principle was
developed in conjunction with British Gas.
This product is manufactured under an ISO
9001:2008 Quality System audited by BSI.
Gledhill’s fi rst priority is to give a high quality
service to our customers.
Quality is built into every Gledhill product
and we hope you get satisfactory service
from Gledhill.
If not please let us know.
Benchmark places responsibilities on both manufacturers and installers. The purpose is to
ensure that customers are provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the manufacturers instructions
by competent persons and that it meets the requirements of the appropriate Building
Regulations. The Benchmark Checklist can be used to demonstrate compliance with
Building Regulations and should be provided to the customer for future reference.
Installers are required to carry out installation, commissioning and servicing work in
accordance with the Benchmark Code of Practice which is available from the Heating
and Hot Water Industry Council who manage and promote the Scheme. Visit www.
centralheating.co.uk for more information.
For further information on the HWA Charter Membership, please refer to the HWA website
hotwater.org.uk.