11
Side Mirror Kit parts list:
2 Mirror side panels to match the
model height ordered
4 side kit brackets with
adhesive tape
6 2”x2” Black Foam Pads with
peel off adhesive
8 screws, 10-32 x 1/2”
8 screw Caps ( part # 434-00)
2 Alcohol Pads
To view a video showing helpful tips
on how to install mirrored side kits,
please go to
GlassCraftersMirroredCabinets.com
and navigate to the cabinet product
that you are installing.
Simply click on the installation tab
(located below the product images)
to view our installation videos.
Side Mirror Bracket
Side Mirror
10-32 1/2” Screws
2” x2” Foam Pads
Side Mirror Kit Installation
For surface mounted 4” and 6” Mirrored Cabinets and 6” semi-
recessed Mirrored Cabinets.
1) Attach the side mirror kit brackets thru the pre-punched
holes in your cabinet.
2) Try to use the first row of holes from the top and bottom of
your cabinet. Using the eight 10 -32 x 1/2” screws fasten the
brackets and finish with screw caps.
3) Attach the 2” x 2” foam pads to the outside cabinet wall
above, below and in between the position of the brackets.
4) Clean the backside of the side mirror kit panel with the Alco-
hol pads. Check alignment before you attach the mirror to be
sure it will align even with the top of the
cabinet.
5) Peel off paper covering of the adhesive tape on the side kit
brackets pads.
(This holds the mirror in place)
. Carefully align
the mirror to the cabinet evenly on all four sides. Press firmly
into place and attach to the side kit mirror to the cabinet body.
(Note: Once installed, do not try to remove the mirror as it will break.)
