5
Detail 2B
Detail 3A
Detail 3B
Use a level to determine that the dotted line
on the template is perfectly vertical and
matched with the marked centerline on the
curb.
Mark the correct height for the top of the
bracket.
STEP 2
. Using the penciled centerline on the wall use
a level to recheck the exact vertical position. Mark the
top height for the bracket at 66” or 76” as per your
unit. Place the bracket in position on the centerline
and mark holes for the wall bracket.
76” high unit
66 high unit
NOTE: Loosen the set screws
and the bracket top slides out
for installation
After drilling the holes for the Header Bracket,
add silicone to each hole and put the anchors in
place.
FOR MODELS USING A RETURN PANEL:
Stop here and read the installation manual for the
RETURN PANEL. The Return panel and supporting
elements must be installed before proceeding.
STEP 3. Drill and install the install the Header Wall
Bracket
Use the Flathead Screws and and anchors as
supplied.
