STEP 16
. Lift the door straight up and lower it into position
with the Roller on the header with the bottom edge of the
glass inside the guide on the curb. Test the movement left to
right to be sure the doors move freely and are not scaping on
the bottom guide.
Adjust the doors using the roller adjustment wrenches, as supplied, as shown
in the illustrations
Detail 16C
for the inside door rollers and
Detail 16D
for the
outside door rollers. After they are adjusted for smooth operation tighten the
inner door roller screws and place the Inner Roller Cap
Detail 16E
over each
Inner Roller. Fix the Inner Roller Cap in place with the set screw. Install the
Outer Roller Cap
Detail 16F
and the Outer Roller Back Plate as shown in the
Illustrations. Fix the Outer Roller Caps and Back Plates in place with the set
screws.
14
Detail 16B -- Side View
Detail 16E
Install the Inner
Roller cap
Detail 16F
Install the
Outer Roller
Cap
and the
Back Plate
Detail 16D
Detail 16C
Detail 16A -- Front View
Lift the door
straight up and
lower it into posi-
tion with the Roller
on the header with
the bottom edge of
the glass inside the-
center guide on the
curb.
