2
Tools Required for Installation
GlassCrafters recommends the following tools to
properly and safely install your Mirrored Cabinets.
A. Safety Glasses -- should be worn at all times
B. Tape Measure
C. Level
D. #2 Phillips Head Screw Driver
E. Power Screw Driver
F. Electric Drill
G. 8mm 3/16” Masonry Drill Bit
H. 7/32” Drill Bit
I. Non Ammonia Household Glass Cleaner
J. Soft Paper Towels
Center Glass Shelf with Decorative Wall Mirror
with Two Mirrored Cabinets
Unpack all parts carefully and protect Glass and
Mirror parts during installation.
This Center Mirror Shelf is installed on surface
mounted cabinets only. Be sure to provide at least
1 inch of clearance above any faucet or other
obstruction.
G
l
a
ss
S
helf
Ny
lo
n
S
c
r
e
w
s (4)
1/4” x
2
0
Cli
p
Hol
d
e
r
S
c
r
e
w
s (4)
6/
32
” x
3
/4 x #
2
4” cli
p
- (4)
6” cli
p
- (
8
)
4” Cli
p
Hol
d
e
r
(
2
)
6” Cli
p
Hol
d
e
r
(
2
)
Parts supplied with this shelf kit --
INSTALLATION STEPS:
Step 1
-- Remove the existing Phillips head
cabinet screws. Place the clip holder in position and
reinstall the cabinet screws.
The Glass Shelf Clip Holder must be installed on
each cabinet
BEFORE
the cabinet is surface mount
installed. Determine the left and right cabinet for the
proper positioning of the clip holders.
1
SU
R
FACE
M
OUNT
M
i
n
i
mum
1” Cle
aran
ce
To insure proper installation in complete compliance with
your warranty, we recommend installation
by a professional installer.
Cleaning Recommendations:
Never use abrasive cleaners or cleaners containing
ammonia. This may cause chemical damage to the
mirror and void the warranty.
For cleaning the mirror, we recommend using ammonia
free Sprayway brand glass cleaner, which is available at
a variety of retail outlets.
www.spraywayinc.com/content/glass-cleaner
