12/22/14
9
Rev.5 (EC 02.293.435)
Cleaning
If cleaning is necessary, using only a damp cloth with only water, wipe only the exterior of the control chassis.
Replacement Parts:
Power cord:
If the power cord supplied with the control would become missing or damaged, replace only with the appropriate rated
power cord noted by the description below.
SJT-3 14 AWG, 15 Amp, 125 VAC, less than 3 meters in length (120volt controls only)
Fuse:
Use only 250Volt fuse, 15 amp rating (120volt controls only)
Warranty
See the current Glas-Col warranty policy located under the General Sales Policy on the Glas-Col website at
www.glascol.com
.
Glas-Col reserves the right to make product refinements without prior notice.
Calibration
Contact Glas-Col for more information about calibration.
711 Hulman Street, P.O. Box 2128, Terre Haute, IN 47802-0128
Phone. (812) 235-6167, Fax. (812) 234-6975
E-mail: [email protected]
Web: www.glascol.com
