2
WORK SURFACE SAFETY
INSTALLATION INSTRUCTIONS
Work Surface Use Requirements
■
Intended for use with Gladiator
®
Steel Modular GearBox
cabinets only.
■
Maximum weight limit is 600 lbs (272 kg) for the work surface
supported by two Gladiator
®
Steel Modular GearBox cabinets.
Install Work Surface
1.
Unpack work surface and dispose of/recycle all packaging
materials.
2.
Position two Gladiator
®
Steel Modular GearBox cabinets side-by-
side.
NOTE:
If you have installed casters on the cabinet, lock the
casters.
3.
Align the groove in the bottom of the work surface with the space
between the cabinets and set the work surface onto the top of
the cabinets.
NOTE:
Make sure the work surface is fully seated between the
raised edges of the cabinet tops.
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
work surface.
Failure to do so can result in back or other injury.
