opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
Flush the water lines for one minute. This flushes away
opmount Installation (continued)
opmount Installation (continued)
opmount Installation (continued)
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
in the sink. Secure the soap assembly(O) to the sink with
opmount Installation (continued)
Installation (continued)
8
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER fro further assistance.
NOTE:
The hot side inlet tube is indicated by
a label. Avoid twisting wires together or placing
the wires close to each other and damaging.
7
Attaching the quick connector to
the receiving block
9
Making the water supply
connections
8
Installing the weight
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Attaching the quick connector
to the receiving block
7
8
9
8
Installation (continued)
9
18
Weight
here
Weight
here
20
20
19
19
2
1
Installing the weight
Install the weight clip (20) at the point of the hose marking "weight
here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Making the water supply
connections
Thread the nut (1) on the supply line onto the outlet of
the water supply valve (2) and tighten with a wrench. Do
not overtighten.
NOTE:
The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
overtighten.
Attaching the quick connector
to the receiving block
7
8
9
8
Installation (continued)
9
18
Weight
here
Weight
here
20
20
19
19
2
1
Installing the weight
Install the weight clip (20) at the point of the hose marking "weight
here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Making the water supply
connections
Thread the nut (1) on the supply line onto the outlet of
the water supply valve (2) and tighten with a wrench. Do
not overtighten.
NOTE:
The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Install the weight clip (20) at the point of the hose marking
“weight here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Attaching the quick connector
to the receiving block
7
8
9
8
Installation (continued)
9
18
Weight
here
Weight
here
20
20
19
19
2
1
Installing the weight
Install the weight clip (20) at the point of the hose marking "weight
here”.
Insert the weight (19) onto the clip (20) by sliding it down onto the
clip (20).
Push the quick connector (18) firmly upward and attach it to
the receiving block (9). Pull down moderately to ensure the
connection has been made.
Making the water supply
connections
Thread the nut (1) on the supply line onto the outlet of
the water supply valve (2) and tighten with a wrench. Do
not overtighten.
NOTE:
The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Weight
here
Weight
here
11
Cómo hacer las conexiones del
suministro de agua
From under the sink, screw the soap dispenser (T) onto the
soap assembly (O) shank. Insert the soap pump (Q) down
Insert the soap assembly (O) through the selected hole
in the sink. Secure the soap assembly(O) to the sink with
9
Making the water supply connections
Thread the nut (1) on the supply line onto the outlet of the
water supply valve (2) and tighten with a wrench. Do not
overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
Flush the water lines for one minute. This flushes away
11
Removing the quick connector
If it is necessary to remove the quick connector (1),
squeeze the tabs (2) on the quick connector and then
pull down to disconnect.
2
opmount Installation (continued)
12
Cómo purgar las tuberías y
comprobar que no haya fugas
Flushing and checking for
leaks
Pull the hose assembly out of the spout and remove
the spray head by unscrewing it from the hose in a
counterclockwise direction. Be sure to hold the end of
the hose down into the sink and turn the faucet to
the warm position where it mixes hot and cold water.
Flush the water lines for one minute. This flushes away
any debris that could cause damage to internal parts.
Check for leaks.
Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening
it back onto the spray hose in a clockwise direction.
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose
the gasket (1) in the hose.
1
Instalación por abajo (continuación)
HOMEDEPOT.COM/GLACIERBAY
Póngase en contacto con 1-855-HDGLACIER para obtener más asistencia.
9
9
Cómo montar el conector rápido al
bloque receptor
10
Instalar la peso
Weight
here
Weight
here
20
20
19
19
Presiona firmemente el conector rápido (18) hacia arriba y fíjalo en
el bloque receptor (9). Hala hacia abajo ligeramente para asegurar
que la conexión es segura.
Instala el sujetador de la peso (20) en la punta de la manguera
marcada “weight here” (peso aquí).
Inserta la peso (19) en el sujetador (20)
deslizándola en el sujetador (20).
NOTA:
El tubo de entrada del agua caliente se identifica con una etiqueta.
Evita enroscar los cables juntos o colocarlos cerca y evita dañarlos.
Enrosca la tuerca (1) de la línea de suministro en la salida de la
válvula de suministro de agua (2) y aprieta con una llave. No
aprietes demasiado.
IMPORTANTE:
Luego de terminar la instalación, abre los suministros de
agua caliente y fría. Revisa si hay filtraciones.
Retira del caño el ensamblaje de la manguera
y retira el cabezal del rociador desenroscándolo de la manguera en el
sentido contrario a las manecillas del reloj. Asegúrate de sostener el
extremo de la manguera hacia abajo en el fregadero y gira el grifo a
la posición de agua tibia donde mezcla el agua caliente y la fría.
Deja que corra el agua por un minuto. Esto enjuagará cualquier
suciedad que podría dañar las piezas internas. Verifica que no haya
filtraciones.
Vuelve a ajustar las conexiones que lo necesiten, pero sin apretar
demasiado. Vuelve a instalar el cabezal rociador ajustándolo
manualmente en la manguera del rociador de izquierda a derecha.
Flush the water lines for one minute. This flushes away
overtighten. Reinstall the spray head by hand tightening
Flush the water lines for one minute. This flushes away
overtighten. Reinstall the spray head by hand tightening
Flush the water lines for one minute. This flushes away
overtighten. Reinstall the spray head by hand tightening
