7
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
6
Installing the lift rod
□
Insert the lift rod (N) through the faucet
assembly (A) and into the strap (M).
□
Tighten the screw (L).
1
Flushing and checking for leaks
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This flushes away any debris that could
cause damage to internal parts.
□
While the water is running, check for leaks.
□
Turn off the water and replace the aerator.
Operation
IMPORTANT:
After installation is complete, remove the
aerator to flush the water lines.
L
M
N
A
