Small hole
Large hole
I
F
F
Tightening the base
Insert the pull-out spray hose (J) through the small
hole of the base (I).
Use one hand to hold the base (I) and the
second hand to tighten the two screws with the
allen wrench (L) until the locking nuts secure
the base (I) on the sink. Make sure the “FRONT”
mark on the base (I) faces the front of the sink
while tightening the screws.
Installation (continued)
4
I
J
F
I
L
3
Inserting the hose
NOTE:
Ensure the flexible hoses do not twist when inserting
them through the small and large holes in the base (I).
Insert supply lines (F) separately through the large
hole of the base (I).
5
HOMEDEPOT.COM/GLACIERBAY
