Installing the faucet assembly
Preparing the pop-up assembly
Shut off the water supply.
Place the faucet (A) through the mounting-
holes in the sink.
Clean off the installation surface.
Secure the faucet (A) to the sink using the
mounting nuts (C) provided .
Installation
1
2
CAUTION :
Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE:
If the sink is uneven, use silicone under the
putty plate.
H
D
E
F
Remove the plunger (H) and drain flange (D) from
the drain body (G).
Screw the lock nut (F) all the way down, and
push the rubber washer (E) down.
A
C
4
