GJD GJD515 Скачать руководство пользователя страница 3

1.3. Precautions

• 

Only use wall brackets and tripod with compatible 

mounting.

• 

Install the product only on a solid surface. 

• 

Install the product so that the detection line is not 

influenced by interference from tall grass or tree 

branches waiving in the wind.

• 

For perimeter protection, the unit should be placed at 

desired detection height and parallel to ground.

• 

Do not install or leave the product in a location 

exposed to heat, vibrations or impacts. 

1.4. Part identification

2. Installation and detection methods

2.1. Installation methods

The Laser-Watch sensor is compatible with a number of 

conventional wall brackets used for surveillance cameras, 

for example Bosch MBE-28B and Axis 0217-031. Using a 

conventional wall bracket means all standard accessories, 

such as pole mounts, corner mounts etc., can be used. 

When using the product for mobile applications, the threaded 
UNC 5/8” - 11 hole is compatible with most surveyor tripods. 

The sensor must always be mounted on a steady

foundation, such as a wall or a pole that is well 

secured to minimize risk of misalignment due to

vibrations.

2.2. Detection methods

With fully adaptable alarm zones, the product has many 

detection methods depending on application. Below are 

three typical applications described. 

2.2.1. Perimeter detection

The product is used to detect all objects crossing the virtual 

fence. Zones can be created along the line of sight to permit 

different actions based on object location. For these types 

of applications, the sensor should be placed at the desired 

detection height and be aligned with the ground. 

2.2.2. Spot surveillance

Detection is only desired in a specific area, for example a 

part of a road, an entrance to a house or along a wall. These 

applications allow the sensor to be located anywhere with a 

clear line of sight to the detection area. 

2.2.3. Change detection

The product is used to detect if an object moves. This 

application allows the sensor to be located anywhere with a 

clear line of sight to the object. 

3

Содержание GJD515
















Отзывы: