GJD GJD515 Скачать руководство пользователя страница 2

              

WARNING

Failure to follow the instructions provided by this warning and improper handling 

may cause death or serious injury

              

CAUTION

Failure to follow the instructions provided by this caution and improper handling 

may cause injury and/or property damage

This symbol indicates prohibition. The specific prohibited action is provided in and/or around the figure.

This symbol requires an action or gives an instruction.

WARNING

Do not use the product for purposes other than detection of people and vehicles. 

Do not use the product to activate doors or other moving objects, which may cause an accident.

Never attempt to disassemble or repair the product. It may cause fire or damage to the devices.

Hold the main unit securely when you install or service it. Exercise care not to bump the product against 

nearby objects or drop it inadvertently.

CAUTION

Do not stare directly into the red alignment laser. 

Do not leave the red alignment laser turned on after installation process is complete. 

Only use approved Power over Ethernet power supplies. Never try to power the device in

other ways than with the RJ45 PoE connection or the 12 VDC connections.
Do not touch the unit connections with a wet hand or when the product is wet with rain. 

It may cause short circuit and damage the unit.

Clean and check the product periodically for safe use. If any problem is found, contact GJD 

or authorized partner to solve the issue before continuing to use the product.

This product is intended to detect intruders and is not designed to prevent theft, disasters or 

accidents. The manufacturer shall not be held liable for any damage to user’s property resulting

from theft, disasters or accidents.

2

Содержание GJD515
















Отзывы: