6.
Press Upload button. The firmware file will be uploaded to the Laser-Watch. When the file is uploaded, the unit will
replace the firmware and then reboot the system with the new firmware.
7.
After a reboot the firmware settings page will be shown again.
8.
Press Start firmware button to restart the Laser-Watch with the new firmware.
5.3.5. Restart after hardware reset
1.
The unit will start in bootloader.
2.
If there is any issue with the firmware, please restore factory firmware by pressing Restore factory firmware button.
3.
Press the Start firmware button to restart the unit with the factory default IP address and login.
5.4. Alarm settings
The Laser-Watch has four types of alarms, Zone alarm, Reference point alarm, Heartbeat and Weather alarm. All alarms are
designed for network communication, but the built-in relay can also be used.
5.4.1. Zone alarms
Zone alarms are standard alarm for object detection. Up to 20 zones can be created and each zone can have individual
settings and alarm actions.
1.
In the Alarm settings tab, open the Zone alarms sub tab (default)
2.
Press “+ Add zone” to create an alarm zone. Input fields appear on the right.
3.
Enter a unique zone name.
4.
Enter the near distance, the distance at which the zone should start.
5.
Enter the far distance, the distance at which the zone should end.
10
Содержание GJD515
Страница 15: ......