Gitzo Mini Traveler, Инструкция по эксплуатации, Страница: 9 / 24

Fig. 10 – How to remount the table tripod head
In order to remount the head on the tripod, unscrew the screw “D” about 1 mm
from the base, and align the hole “E” on the base of the head with the screw “D”.
Lock the head with the screw “C” using the TORX key.
Fig. 11 – Adjusting leg friction
If leg tightness decreases as a result of prolonged use of the tripod, please use
a TORX key (supplied with the product) to tighten the legs. Carefully tighten
the screws “F” one-third of a turn only, checking the tightness obtained each
time. If necessary, tighten the screws an extra one-third of a turn until you obtain
the required leg tightness.