Girard Systems GC154, Инструкция по эксплуатации

Страница: 3 / 12

Page 3 of 12
CONTENTS
Product Description …………………………………………………………………………. 3
Installation ……………………………………………………………………………………… 6
Set up and Programming …………………………………………………………………. 8
Programming to a Motion Sensor ……………………………………………………… 9
Programming to an Anemometer ………………………………………………….... 12
THE G–LINK SYSTEM
The G-Link motors and control modules provided by Girard Systems communicate by
use of RF signals on a frequency of 433.92 MHZ. This eliminates the need for wiring
and the drilling of holes in the vehicle. These components must be electronically
matched, programmed or paired before use. This is usually done at the Girard Systems
factory. Should the need arise for the user to pair a device with the motor controller
they must refer to the appropriate manual for the devices applicable to their particular
installation.
PRODUCT DESCRIPTION
The G – Link GC154 is a single awning motor control unit that can be remotely operated
with a G-link paired remote handset or switch from a distance of up to 500ft. in open
air and up to 100ft in the presence of obstructions. The operating frequency is
433.92MHZ.