Girard Products G-1500, Руководство пользователя

Страница: 8 / 45

11 | P a g e
FOR PERSONAL SAFETY AND QUALITY OF INSTALLATION, TWO
INSTALLERS ARE RECOMMENDED FOR THIS PRODUCT
A. UNPACKING
1.
Before starting any of the installation procedures unpack the awning and inspect the
product for any possible damage that may have occurred during shipping.
2.
Before starting any of the installation procedures review the length and motor
placement of your awning for correctness.
3.
When you have determined that the product is to your satisfaction, remove the
mounting brackets and place the awning in a safe location while preparing the RV.
A. To remove the brackets locate the slide lock that retains the bracket to the
housing. (Figure. 2)
B. Using a 5mm Allen wrench loosen the set screws on the slide locks.
C. Once the set screws have been loosened the slide locks should slide freely,
clear the slide lock away from the bracket.
D. You should now be able to remove the bracket.
4.
If you have discovered any damage or missing parts please follow the instructions in
the Warranty section of this manual.
(FIGURE 2)