Girard Guitars Augsburg Germany
G-BASS Owner Manual V1.0 2017
12
Output Jack
This is where the output signal of the Bass is sent to the amplifier by plugging in any
standard 1⁄4” guitar cable. Each Girard Guitars Bass is provided with an output jack which
operates as switch to the power supply for Active on board electronics.
This means that when you do not use your Bass remember to unplug the output jack. This
will preserve the life of your battery.
In case of long period of not using the Bass it is recommended to remove the battery from
the bass.
Preventing Electrical Accidents
If the instrument must be used outdoors in bad weather, or in a place with
high humidity, please use caution. Please read the Owner’s Manuals that
came with the devices, such as power amplifiers, etc. that you connect your guitar to.
Accidents such as fire or electric shock can occur due to lightning strikes.
Using Batteries properly
For guitars that use a battery, make sure that only the specified battery is used and it is
installed with its polarity markings aligned properly.
On guitars that require two or more batteries, do not mix new batteries with old.
Improper use of batteries can result in the batteries rupturing or leaking, causing injury or
damage.
Never incinerate batteries. Separate batteries from household garbage and dispose of them
in a
proper manner.
