Girard Guitars Augsburg Germany
G-BASS Owner Manual V1.0 2017
11
Volume Control
this control regulates the output signal or output level of the Bass.
Turning the knob clockwise will increase the volume while turning counter-clockwise will
decrease the volume.
Depending on your Girard-guitar Bass Model there might be 1 or more volume controls
Tone Control
In case of a Passive Bass Guitar it acts through a capacitor to adjust only the high frequencies
in the signal.
With the knob turned fully clockwise, will result in a clear sound, all frequencies are present.
Turning the knob counter-clockwise decreases the high frequencies.
In case of an active Bass one more tone knobs are available and each control specific
frequencies boosting these frequencies or cutting them
Blend Control
In case a blend Control (or Mix) is available on your bass then the characteristic of this
control is to mix both signals of the pickup.
In middle position for this control will result in hearing both pickups, turning the knob full
stop to one side or the other will result in hearing just one pickup.
Volume Control
Blend Control
Bass Control
Middle Control
Treble Control
Output Jack
Active 3 Band Bass
