Figure 2: Connection example, energy sensor
(4) Monitored consumer
o
Connect energy sensor as shown in the connection example (Figure 2).
o
Insert energy sensor in the appliance box in such a way that the
Prog
button and status
LED are visible.
o
Perform commissioning.
o
Mount the cover.
4.2 Commissioning
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
During commissioning, cover the parts carrying voltage on the device and in
their surrounding area.
Integrating an energy sensor into the project
The energy sensor must be read in using a device search of the eNet Server and integrated into
the project.
To do this, the eNet server must be connected correctly and connected to a computer (see the
instructions of the eNet server).
o
Start the commissioning interface of the eNet server. Create or open the project into which
the energy sensor is to be integrated (see product documentation of the eNet server).
o
Start the device search in the commissioning interface of the eNet Server.
o
Press button
Prog
(2) for longer than 4 seconds.
The status LED (4) flashes after 1 seconds. The energy sensor is in programming mode for
approx. 1 minute.
The eNet server finds the energy sensor and displays it on the commissioning interface.
The status LED of the energy sensor goes out.
o
Add the energy sensor to the device location using the commissioning interface.
Removing an energy sensor from the project
o
In the commissioning interface of the eNet server, delete the energy sensor from the
current project (refer to the product documentation of the eNet server).
The energy sensor is removed from the project and the parameters reset to the default
setting.
32581512
10864964
11.04.2017
3/8
Wireless energy sensor, 1-gang Mini
