System 3000
Electronic switching insert
–
Incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED
lamps that can be dimmed according to the trailing edge phase control principle, HV-LED
or compact fluorescent lamps that can be dimmed according to the trailing edge phase
control principle.
LED leading edge phase control,
|
The connection of inductive transformers is not permitted.
–
Incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED
lamps that can be dimmed according to the leading edge phase control principle, HV-LED
or compact fluorescent lamps that can be dimmed according to the leading edge phase
control principle.
Presetting the operating mode
Precondition: Load is switched off.
￭
Press button Test (1) for longer than 4 seconds, until LED (2) lights up.
Figure 3: Assignment of LED colour for the operating mode
￭
Keep pressing button Test (1) for less than 1 second, until the necessary operating mode
is selected.
The LED (2) lights up in the colour of the selected operating mode (Figure 3).
￭
Save the settings: Press the button Test (1) for more than 1 second or do not press for
30 seconds.
LED (2) goes out and the light is switched on: The operating mode is saved.
5
Technical data
Rated voltage
AC 230 V~
Mains frequency
50 / 60 Hz
Standby load depending on the cover
approx. 0.1 ... 0.5 W
Power loss
approx. 4 W
Ambient temperature
-5 ... +45 °C
Connected load at 25°C (Figure 4)
Figure 4: Connected load
When operating with neutral conductor or without neutral conductor in operating mode
{
: Connected load for HV-LED lamps typ. 3...200 W, electronic transformers with
NV-LED typ. 20...200 W.
4 / 7
82400512
24.05.2019
