34
Assigning surface-mounted home station video via floor-call button
If you cannot access the flat during start-up, you can
also assign the surface-mounted home station video
via a connected floor-call button:
1. Press the "Systemprogr." button on the
control
device
for 3 sec. to start the programming
mode.
2. Press the call button on the
door station
for
3 seconds. Release the call button following
the brief acknowledgement tone sounds.
✓
The door station outputs a long acknowledge-
ment tone.
3. Press the
floor-call button of the home
station
to be asseigned for 3 seconds. Release
the floor-call button after the brief acknowl-
edgement tone sounds.
✓
A long acknowledgement tone indicates
successful assignment.
4. Briefly press the "Systemprogr." button on the
control device
to exit the programming mode.
i
Only possible with home
station connected directly
With several parallel home stations, only the
home station connected directly to the floor-call
button can be taught in via the floor call button.
3s
3s
3s
1x
